{"product_id":"snaglock","title":"SnagLock™","description":"\u003cp\u003eKeep the dust outlet aimed where you set it. This two-piece PETG dust-port set is designed for the Festool TS 55 REBQ and locks into a fixed position instead of rotating freely with hose movement.\u003c\/p\u003e\u003cp\u003eThe angled outlet helps route the dust hose away from the rear of the saw, while the separate three-notch locking nut secures the adapter to the compatible original Festool dust-port base. The hose-locking outlet is designed for a 36 mm Festool hose connection.\u003c\/p\u003e\u003cp\u003eThis is the 36 mm hose-locking set. The separate push-fit-only alternative is not included.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFixed-position design helps prevent the outlet from rotating with hose movement\u003c\/li\u003e\n\u003cli\u003eAngled outlet supports cleaner hose routing behind the saw\u003c\/li\u003e\n\u003cli\u003eTwo-piece locking assembly\u003c\/li\u003e\n\u003cli\u003eThree-notch press-on locking nut\u003c\/li\u003e\n\u003cli\u003eDesigned for a 36 mm Festool hose connection\u003c\/li\u003e\n\u003cli\u003ePETG construction for workshop use\u003c\/li\u003e\n\u003cli\u003eNo screws or additional assembly hardware required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1 × PETG 36 mm Hose-Locking Dust Port Adapter\u003c\/li\u003e\n\u003cli\u003e1 × PETG Three-Notch Locking Nut\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOnly the two 3D-printed PETG components are included.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eRequired Existing Part\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eCompatible original Festool dust-port base\/connector supplied with the supported saw\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe printed set does not replace a missing or incompatible original saw-side dust-port base.\u003c\/p\u003e\u003ch2\u003eNot Included\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFestool track saw\u003c\/li\u003e\n\u003cli\u003eOriginal Festool saw-side dust-port base\/connector\u003c\/li\u003e\n\u003cli\u003eDust extractor or vacuum\u003c\/li\u003e\n\u003cli\u003e36 mm hose or hose cuff\u003c\/li\u003e\n\u003cli\u003eGuide rail, saw blade, batteries, charger, or other saw accessories\u003c\/li\u003e\n\u003cli\u003eWood, workbench, keyboard, tools, or demonstration props shown in photos\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMaterial\u003c\/h2\u003e\u003cp\u003ePETG\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eDesigned for:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eFestool TS 55 REBQ with the compatible original dust-port base\/connector\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eFit is not confirmed for Festool TS 55 EQ. Do not assume compatibility with other TS, TSC, HK, or HKC variants without comparing the saw-side dust-port interface.\u003c\/p\u003e\u003cp\u003eVerify the complete tool model and original dust-port base before purchase.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003ePress the three-notch locking nut onto the adapter as shown, making sure all locking features are fully seated. Install the completed set only on the compatible original saw-side dust-port base.\u003c\/p\u003e\u003cp\u003eBefore operating the saw, confirm that the adapter, locking nut, original dust-port base, and hose connection are fully seated. Keep the hose clear of the cutting path, guide rail, moving parts, and workpiece.\u003c\/p\u003e\u003cp\u003eStop using the set if either printed component becomes loose, cracked, deformed, worn, or heat-damaged.\u003c\/p\u003e\u003ch2\u003eImportant Note\u003c\/h2\u003e\u003cp\u003eThis is a 3D-printed workshop accessory. Minor surface layer lines are normal due to the printing process and do not affect normal function.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eFestool, TS 55, and REBQ are trademarks of their respective owner. Forge N Build is not affiliated with or endorsed by Festool.\u003c\/small\u003e\u003c\/p\u003e","brand":"Forge N Build","offers":[{"title":"Default Title","offer_id":53217365131573,"sku":"FNB-FES-TS55-REBQ-SNAGLOCK","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/1783\/0197\/files\/snaglock-shopify-cover-v1.png?v=1785084323","url":"https:\/\/forgenbuild.com\/products\/snaglock","provider":"ForgeBuild","version":"1.0","type":"link"}