{"product_id":"stacktrack-t-loc-guide-rail-carrier","title":"StackTrack™ T-Loc Guide Rail Carrier","description":"\u003cp\u003e\u003cstrong\u003eTwo-piece PETG storage system designed to carry a compatible guide rail alongside a Systainer T-Loc I–V stack.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTurn a compatible T-Loc box stack into a dedicated guide-rail transport station. StackTrack™ uses one upper holder and one lower holder to keep the rail aligned vertically beside the boxes instead of carrying it separately.\u003c\/p\u003e\n\u003cp\u003eThe lower holder attaches to the bottom box while the upper holder attaches to the upper box. Their aligned open channels receive the guide rail from above. Integrated hook-shaped interfaces connect the printed parts to the compatible T-Loc box features shown in the product photos.\u003c\/p\u003e\n\u003cp\u003eThe selected product set contains two printed parts. The lower component includes five circular relief openings, while the upper component uses a continuous reinforced body. Together, they create one top-and-bottom rail-support system.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTwo-piece upper and lower guide-rail support system\u003c\/li\u003e\n\u003cli\u003eVertical storage alongside a compatible T-Loc box stack\u003c\/li\u003e\n\u003cli\u003eAligned open channels for top-down rail insertion\u003c\/li\u003e\n\u003cli\u003eIntegrated hook-shaped box interfaces\u003c\/li\u003e\n\u003cli\u003eLower holder with five circular relief openings\u003c\/li\u003e\n\u003cli\u003ePETG construction with visible FDM texture\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1 × StackTrack™ upper guide-rail holder\u003c\/li\u003e\n\u003cli\u003e1 × StackTrack™ lower guide-rail holder\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOnly the two 3D-printed PETG holders are included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eRequired Hardware\u003c\/h2\u003e\u003cp\u003eNo separate screws or mounting hardware are specified for the box-interface installation shown in the product photos.\u003c\/p\u003e\n\u003ch2\u003eNot Included\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eGuide rail\u003c\/li\u003e\n\u003cli\u003eSystainer T-Loc boxes\u003c\/li\u003e\n\u003cli\u003eSystainer cart, dolly, or wheeled base\u003c\/li\u003e\n\u003cli\u003eClamps, saws, power tools, cables, or accessories\u003c\/li\u003e\n\u003cli\u003eWorkbench, wall, or other demonstration items\u003c\/li\u003e\n\u003cli\u003eAny additional or mirrored holder pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaterial\u003c\/h2\u003e\u003cp\u003ePETG plastic, 3D printed for practical workshop use.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eDesigned for Systainer T-Loc box stacks using sizes I through V and the compatible guide-rail profile shown in the product photos.\u003c\/p\u003e\u003cp\u003eGuide-rail profiles and Systainer generations can vary. Compatibility with SYS3 cases, non-T-Loc cases, or other rail profiles has not been confirmed. Compare your exact boxes and guide rail with the product photos before purchase.\u003c\/p\u003e\n\u003ch2\u003eInstallation and Use\u003c\/h2\u003e\u003cp\u003eAttach the lower printed holder to the compatible interface on the bottom box and the upper holder to the compatible interface on the upper box. Align the open rail channels vertically, then slide the compatible guide rail into the two holders from above.\u003c\/p\u003e\u003cp\u003eConfirm that both printed holders are fully engaged with the boxes and that the guide rail is seated in both channels before moving the stack. Periodically inspect the holders and box interfaces for movement, cracks, damage, or wear.\u003c\/p\u003e\n\u003ch2\u003eImportant Note\u003c\/h2\u003e\u003cp\u003eThis is a 3D-printed workshop accessory. Minor surface layer lines are normal due to the manufacturing process and do not affect normal function.\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eFestool, Systainer, and T-Loc are trademarks or product names belonging to their respective owner. Forge N Build is not affiliated with, sponsored by, or endorsed by Festool.\u003c\/small\u003e\u003c\/p\u003e","brand":"Forge N Build","offers":[{"title":"Default Title","offer_id":53199116861749,"sku":"FNB-FES-TLOC-STACKTRACK","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/1783\/0197\/files\/stacktrack-shopify-cover-v1.jpg?v=1784738435","url":"https:\/\/forgenbuild.com\/products\/stacktrack-t-loc-guide-rail-carrier","provider":"ForgeBuild","version":"1.0","type":"link"}