{"product_id":"tilt-pressure-featherboard-set-for-bosch-gts-10-xc","title":"Tilt-Pressure Featherboard Set for Bosch GTS 10 XC","description":"\u003cp\u003e\u003cstrong\u003eDual featherboard system for controlled workpiece support at the table and fence.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAdd controlled side and downward pressure to your Bosch GTS 10 XC table saw setup with a modular two-featherboard system built for experienced woodworkers.\u003c\/p\u003e\u003cp\u003eThe set combines one table-mounted featherboard assembly with one fence-mounted featherboard assembly. Slightly tilted feather fingers help press the workpiece toward the table while supporting consistent contact during the cut. The fence-mounted unit can be adjusted vertically and toward the blade so pressure can be positioned for the current workpiece and setup.\u003c\/p\u003e\u003cp\u003eModular extension components let each assembly be configured for the task while printed adjustment knobs make setup changes practical in the workshop. The rigid printed components are produced in PETG for everyday shop use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis is an advanced table saw accessory intended for users who are already familiar with table saw setup, workpiece control, blade clearance, fence alignment, and the Bosch operating instructions.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTwo-part system: one table-mounted assembly and one fence-mounted assembly\u003c\/li\u003e\n\u003cli\u003eSlightly tilted feather fingers help apply side and downward pressure\u003c\/li\u003e\n\u003cli\u003eFence-mounted featherboard adjusts vertically and toward the blade\u003c\/li\u003e\n\u003cli\u003eModular printed extension components\u003c\/li\u003e\n\u003cli\u003ePrinted adjustment knobs and positioning components\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for the Bosch GTS 10 XC\u003c\/li\u003e\n\u003cli\u003ePETG construction for workshop use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003ch3\u003eTable-Mounted Featherboard Printed Component Set\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × Table Baseboard\u003c\/li\u003e\n\u003cli\u003e2 × Extension Boards\u003c\/li\u003e\n\u003cli\u003e2 × Baseboard Clamp Bars\u003c\/li\u003e\n\u003cli\u003e2 × 14 mm Spacer Blocks\u003c\/li\u003e\n\u003cli\u003e2 × Large Printed Knob Bodies\u003c\/li\u003e\n\u003cli\u003e2 × Large Knob Caps\u003c\/li\u003e\n\u003cli\u003e2 × Small Printed Knob Bodies\u003c\/li\u003e\n\u003cli\u003e2 × Small Knob Caps\u003c\/li\u003e\n\u003cli\u003e8 × Positioning Pins\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFence-Mounted Featherboard Printed Component Set\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × Fence Base\u003c\/li\u003e\n\u003cli\u003e1 × Fence Baseboard\u003c\/li\u003e\n\u003cli\u003e1 × Fence Extension Board\u003c\/li\u003e\n\u003cli\u003e2 × Fence Baseboard Clamp Stones\u003c\/li\u003e\n\u003cli\u003e1 × 40 mm Spacer Block\u003c\/li\u003e\n\u003cli\u003e2 × Large Printed Knob Bodies\u003c\/li\u003e\n\u003cli\u003e2 × Large Knob Caps\u003c\/li\u003e\n\u003cli\u003e4 × Small Printed Knob Bodies\u003c\/li\u003e\n\u003cli\u003e4 × Small Knob Caps\u003c\/li\u003e\n\u003cli\u003e4 × Positioning Pins\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOnly the 3D-printed PETG components are included.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eRequired Hardware — Not Included\u003c\/h2\u003e\u003ch3\u003eFor the table-mounted assembly\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 × M6 × 25 mm screws\u003c\/li\u003e\n\u003cli\u003e2 × M6 × 70 mm screws\u003c\/li\u003e\n\u003cli\u003eM6 nuts and washers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFor the fence-mounted assembly\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e4 × M6 × 25 mm screws\u003c\/li\u003e\n\u003cli\u003e2 × M6 × 65 mm screws\u003c\/li\u003e\n\u003cli\u003eM6 nuts and washers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe source does not specify the exact quantities of separate M6 nuts and washers. Confirm the hardware needed for your assembly before installation.\u003c\/p\u003e\u003ch2\u003eNot Included\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBosch GTS 10 XC table saw\u003c\/li\u003e\n\u003cli\u003eSaw blade, blade insert, blade guard, fence, rails, tracks, or dust-control equipment\u003c\/li\u003e\n\u003cli\u003eAll M6 screws, metal nuts, washers, and other metal hardware\u003c\/li\u003e\n\u003cli\u003eWood stock, finished workpieces, measuring tools, push tools, or other shop accessories\u003c\/li\u003e\n\u003cli\u003eWorkbench, personal protective equipment, and all demonstration props shown in photos\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMaterial\u003c\/h2\u003e\u003cp\u003ePETG\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eDesigned specifically for the Bosch GTS 10 XC table saw.\u003c\/p\u003e\u003cp\u003eCompatibility with other Bosch saws, other brands, modified fences, or alternate track systems is not claimed. Verify your exact saw, fence, track engagement, hardware, alignment, travel, and blade clearance before purchase and before every use.\u003c\/p\u003e\u003ch3\u003eUse and Safety Warning\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWARNING: This is an advanced table saw accessory intended for experienced users only. It is not suitable for beginners.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow all Bosch operating and safety instructions. Before use, verify that every printed component, screw, nut, washer, clamp interface, adjustment knob, fence connection, and track connection is correctly installed and secure. Confirm that the featherboards apply appropriate pressure without binding the workpiece or interfering with the blade, blade guard, fence, insert, or stock path.\u003c\/p\u003e\u003cp\u003eStop using the product immediately if any printed part is cracked, loose, distorted, worn, heat-damaged, or unable to remain securely positioned. Never use the featherboards as a substitute for the saw's guards, push tools, personal protective equipment, or safe operating practices.\u003c\/p\u003e\u003ch2\u003eImportant Note\u003c\/h2\u003e\u003cp\u003eThis is a 3D-printed workshop accessory. Minor layer lines and surface variations are normal due to the manufacturing process and do not affect normal function when the product is correctly assembled and used.\u003c\/p\u003e\u003cp\u003eBosch and GTS 10 XC are trademarks of their respective owner. Forge N Build is not affiliated with or endorsed by Bosch.\u003c\/p\u003e","brand":"Forge N Build","offers":[{"title":"Default Title","offer_id":53217102528821,"sku":"FNB-BOSCH-GTS10XC-FEATHERBOARD","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/1783\/0197\/files\/tilt-pressure-featherboard-set-cover-v2.png?v=1785070791","url":"https:\/\/forgenbuild.com\/products\/tilt-pressure-featherboard-set-for-bosch-gts-10-xc","provider":"ForgeBuild","version":"1.0","type":"link"}