Compact Table Saw Dowel Maker Jig Set

Turn square hardwood or softwood stock into round custom dowels using a compatible table saw setup. This compact jig system combines one fence-mounted base with five interchangeable sizing templates, giving experienced woodworkers a practical way to create matching dowels from shop offcuts and project lumber.

The compact base secures to a suitable table saw fence with an external clamp. Each template block locks into the base and guides one supported dowel size. After cutting, light sanding may be required to achieve the desired surface finish and final fit.

This is an advanced table saw accessory intended only for experienced woodworkers who are already comfortable with table saw setup, alignment, work holding, and power-tool safety.

Features

• Compact fence-mounted jig footprint
• Five interchangeable dowel-sizing templates
• Supported nominal sizes from 1/4 inch through 1-1/4 inches
• High-visibility size markings molded into each template
• No screws or bolts required to assemble the printed jig components
• 100 × 100 mm template-block footprint
• PETG construction for workshop use
• Helps repurpose suitable hardwood and softwood offcuts

Included Sizes

• 1-1/4 in | 31.75 mm
• 1 in | 25.4 mm
• 3/4 in | 19 mm
• 1/2 in | 12.7 mm
• 1/4 in | 6.35 mm

What's Included

• 1 × Compact Table Saw Dowel Jig Base
• 1 × 1-1/4-Inch Template Block
• 1 × 1-Inch Template Block
• 1 × 3/4-Inch Template Block
• 1 × 1/2-Inch Template Block
• 1 × 1/4-Inch Template Block

Only the six 3D-printed PETG components are included.

Required for Use

• Compatible table saw and fence configuration
• Suitable external clamp or clamps for securely mounting the jig to the fence
• Properly prepared square wood stock
• Appropriate personal protective equipment and dust-control practices for your table saw setup

Not Included

• Table saw, saw blade, fence, blade insert, or dust-collection equipment
• Clamps or other work-holding equipment
• Wood stock, finished dowels, furniture, or project materials
• Sanding tools, abrasives, measuring tools, or shop accessories
• Workbench and all demonstration items shown in photos

Material

PETG

Compatibility

Designed for table saw setups that allow the jig base to be securely clamped to the fence and correctly aligned with the blade.

Table saw fences, blade positions, clearances, and safety systems vary. Verify your complete setup before purchase and before every use. This compact version is intended for everyday shop-length work; it is not the larger extended model with integrated dust collection for extra-long dowels.

Use and Safety Warning

WARNING: This is an advanced table saw jig intended for experienced woodworkers only. It is not suitable for beginners.

Thoroughly understand the operating method and your table saw manufacturer's safety instructions before use. Do not use this jig if you are not fully comfortable with table saw safety, alignment, work holding, and feed control.

Incorrect alignment, direct contact between a PETG template and the saw blade, excessive friction, or forcing stock through an overly tight opening can generate heat and damage or melt the template. Keep the jig correctly aligned, verify adequate clearance, and stop immediately if any component shifts, binds, contacts the blade, becomes damaged, or shows heat deformation.

Inspect the jig, clamp setup, template, stock, blade clearance, and surrounding work area before every operation. Use at your own risk.

Important Note

This is a 3D-printed workshop accessory. Minor layer lines and surface variations are normal due to the manufacturing process and do not affect normal use when the jig is correctly installed and operated.